ich habs gewagt!
und es läuft! mit multiman backup von externer platte geladen
Beiträge von thegate
-
-
Tut PS3 3.55CFW mit Lvl1 und Lvl2 P&P erstellen
Today, in the wee hours of the morning, a dev by the name of Wutangrza, was successful in recreating flukes1's 3.55 peek poke CFW. As we reported the other day, flukes1 had successfully made a LV1/LV2 3.55 peek and poke enabled CFW. However, due to legal reasons he decided against releasing it. Wutangrza was successful in repeating flukes1's process and has released a very easy to use patch for the official 3.55 firmware. So what does this mean for the average user? It means that it is only a matter of time now, before apps like multiMan and others, will begin to work with this new CFW.
Read more: PSGroove.com - LV1/LV2 Peek and Poke CFW Patch Released http://psgroove.com/content.ph…ch-Released#ixzz1BIFcF6Yk
[Blockierte Grafik: http://psgroove.com/attachment.php?attachmentid=674&d=1295262554]
The above picture shows lv1 dumper running successfully.
Download: Official 3.55 Firmware http://dus01.ps3.update.playst…c9b6921a8c61/PS3UPDAT.PUP
Downlaod: Wutangrza-3.55.tar.gz http://www.multiupload.com/IE967TK7R5
Download: bsdiff4.3-win32.zip http://sites.inka.de/tesla/download/bsdiff4.3-win32.zipSteps for Patching 3.55 Official Firmware on Windows by PSGroove.com
Step 1
Download the above files and extract them all into the same folder
Step 2
Open a command prompt, navigate to the folder where you extracted the above files, then type:
Code:bspatch PS3UPDAT.PUP PS3CFW.PUP Wutangrza-3.55.patch
Step 3
Delete PS3UPDAT.PUP
Step 4
Rename PS3CFW.PUP to PS3UPDAT.PUP and thats it! You now have an official 3.55 with lv1/lv2 peek and poke enabled
You're now ready to install the PUP, make sure your console has 3.55 Official Firmware installed prior to flashing the peek and poke enabled version. You will need to install it from the Recovery menu. Also, after flashing the 3.55 peek and poke enabled CFW, you may then install Geohot's CFW. You will still retain lv1/lv2 peek and poke.
Read more: PSGroove.com - LV1/LV2 Peek and Poke CFW Patch Released http://psgroove.com/content.ph…ch-Released#ixzz1BIFozoJR
Quelle
http://psgroove.com/content.ph…d-Poke-CFW-Patch-Releasedwenn jemand bitte so nett wäre das zu übersetzen. mir langt es zeitlich jetzt nicht
-
Ok verstehe
wenn ich es per klick haben will muss nen chip her
wenn net dann übder meinen umweg!
sehe ich das so richtig
-
kannst du das bitte erläutern?
Oder per DEV1 uLaunchELF starten und über uLaunchELF eine andere ELF starten.
kann dir net ganz folgen.
wäre über hilfe dankar
-
JA ich habe das schon gelesen!
aber ich kann dennoch elf dateien ausführen
konnte ja dennoch das bios dumpen etc etc
nun ist meine frage nur wie ich es am besten anstellen kann
es zb in nur 3 schritten zu machen und nicht wie jetzt in zb 8 schritten
ich hoffe ihr könnt mir folgen!
-
So ich hab ne
SCPH-90004 DateCode 9C und hier mein bios fileSCPH-90004_BIOS_VX_PAL_230.BIN
mc freeboot geht leider nicht
aber ich kann es über Action Replay manuel starten und elf dateien ausführen
Auch installieren geht auf MC
nur starten geht nicht von MC
was für möglichkeiten habe ich den nun
gibts ne alternative?
den elf files kann ich starten aber über umwege!
-
Hallo Freunde
folgendes
Ich habe hier ne Ps2 fat stehen Mcboot wäre noch möglich was den datecode angeht
nun zu meinem Problem
Ich habe weder AR noch sonstige module
Ich hab ne 16 mb speicherkarte nun zu meinem anliegen wie bekomme ich MC nun auf meine speicherkarte`?
folgendes habe ich versucht
ps2 aufgeschraubt damit ich mit dem ps1 Spiel gran Turismo nen wechsel trick machen kann
nun habe ich aber das problem das ich keine elf Cd habe um über diese dann zb ulauncher zu starten
wäre jemand so nett und würde mir dabei helfengame id lautet wie folgt
SCES_023.80
Ich hoffe Ihr könnt mir helfen
Danke euch schon jetzt vielmals
-
Auch mit dem HTC HD2 der store geht einwandfrei
-
ich benötige auch hilfe
egal was ich amche ich bekomme die ps3 nicht angezeigt in xlink
es wird nur ein string angezeigt
der dann von blau auf rot wechselt und das wars
-
also bei mir geht es nicht !!!!
meine ps3 wird nicht richtig erkannt von xlink kai
-
für moh mujsste hermes nehmen
-
kann ich nicht bestätigen
ich nutze als android FroyoStone_Sense_V3.2
und habe dann wie oben beschriben alles in den android ordner kopiert
also bei mir funtzt Hermes 4 einwandfrei
keine freezer und alle games laufen recht stabil und gut
hier ml meine startup
-
Installiert euch eun android eurer wahl ( ich habs mit nem Desire HD rom getestet) und macht dann folgendes
[Build] PSFAndroid [Update 21-Oct-10]
Hi guys !
After several tests on various android roms I concluded to leave it at your choice.
The steps necessary to adjust to your version of Android are:- Download: multiupload.com/LTJVZKCOLG
- Extract in your Android folder
- Edit startup.txt. Line: set KERNEL zImage
- Run Android
- Open GScriptLite
- Choose the payload and Ps3 FW
- Enjoyhave fun mit Hermes V4
Update 23-Oct:
Copy psfreedom.ko in SDCARD/YOURANDROIDFOLDER/root/system/lib. Overwrite psfreedom.ko
Changelog from kakaroto github:
- Add a payload that disables the patch for unauthorized syscalls. This is equivalent to the 'patched mode' of hermes payloads
- Add patch to remove the 80010019 error to the dev payload too
- Add patch to remove the 80010019 error for games requiring 3.42 (MOH for example)
- Fix the 'install pkg file' offset function for 3.41 Kiosk elf2
- Add support for 3.41 Kiosk consoles
Thanks to Kakaroto & JasonMcKey -
nichts zu danken das wäre nun meine nächste frage gewesen wegen dem kernel
-
das is echt komisch den bei mir gehts ohne probleme
-
Description:
KaKaRoTo's PSFreedom enables unsigned code (homebrew, backups, etc.) on your PS3 using your Nokia N900. This version apparently works on Nokia N800 and N810 too.1. Download psfreedom.tar.gz, extract it, and copy the files to your N900 into /root.
2. To enable, type: ./psfreedom-enable.sh
3. Unplug or switch off your PS3 completely killing the power.
4. Connect your N900 to your PS3 via USB.
5. Boot your PS3 using the power button quickly followed by pressing the eject button.
6. Now you should see Package Manager in the XMB allowing you to install and run unsigned code.
7. To disable and return your N900 to normal, type: ./psfreedom-disable.sh -
startest du bd emulation oder dev bd emulation
denn bei dev emulation gehts bei mir nicht
-
ok folgendes
welche version hast du installiert? mit ofer ohne gui`?
also ich habe die gui version
deinstalliere sie einfach mal installie psfreedom gui neu tausche in beiden ordnern die neue psfreedom siehe post 1
dann startest du psfreedom das erste mal
startest psfreedom wählst dann bd emulation
und dann starte deine ps3 we gewohnt
hatte am anfang auch das pob das ich den start vorgang mehrmals machen musste bvevor die ps3 debug war
-
ok neuer versuche tauche die datei hier und hier
Copy the file to
opt/modu/omap1/
AND
opt/modu/power40/dann beende psfreedom starte es neu und starte dann die emulation wähle dann nochmals bd emulation
versuche es bei gelegenheit mal mit dek open manager 1.13
starte es drücke dann r2
wähle f1 aus und starte es dann über app_home etc
-
also du tauscht die datei ie oben beschrieben
starest mit bd emulation
nimmst am besten den open manager 1.16.2
aktivierst dann mit r2 den patched modus und wählst in deinem fall F1 2010 von der internen hdd
dann wirfst es dich auf das Xmb zurück
dort startest du das game dann mit
app_home/ps3game