[SUPPORT] 80010017 / 80010015 / ffffff Fehler beim Cobra ODE

  • Warez ist der Begriff für nicht korrekt besorgte Games.


    Zitat

    - bei Grand.Theft.Auto.4.Episodes.From.Liberty.City.PS3-DUPLEX findet er keine eboot.bin im swapfile....


    weil du deine eigenen Games einlesen bzw. eigene Images erstellen sollst und das runterladen von Games verboten ist ;)

  • so nm von vorne :)


    Super Slim 4004C
    OFW 4.65
    Cobra Ode Board v3.0.0
    im Laufwerk Final Fantasy XIII


    Bin Neuling auf Ode - habs jetzt erst eingebaut..
    alles sauber gelötet sowie auch Swap part 1


    habs jetzt mal hinbekommen zu converten - ps3 mounted (led) lest ein, blinkt und werkelt 10 sek. rot blau dann 10 sek.rot grün dann stet blau).. fehlercode 80010017 - liegt wahrscheinlich an der FW 4.65..


    ist es unbedingt zwingend dass swapfile zu brennen? dachte es wird mit convertps3iso in die finale iso integriert..


    kann man OFW 4.65 superslim downgraden (patched PS3UPDAT.PUP) oder e3flasher bzw. gibt's andere Möglichkeiten??


    DANKE vielmals für HILFE schon im vorhinein.


    Schritt für Schritt:
    1. Stick vorbereitet 32 GB Transcend
    2. Ordnerstruktur erstellt (ROOT: COBRA, PS3_GAMES, BD_MOVIES..)
    3. alle benötigten Files drauf kopiert (browser.iso, cfg...)cfg wie im Forum bei euch beschrieben geändert.
    4. dann genps3iso gestartet und ISO erstellt
    5. weiters genps3swapdisc Swap erstellt
    6. convertps3iso eine Iso erstellt
    7. diese dann auf den Stick in PS3_GAMES kopiert
    8. PS3 eingeschaltet - warten bis rote led kommt
    9. Stick plugged in -> grüne led
    10.Ps3 eingeschaltet und Cobra Browser angewählt
    11. der Rest is ja dann bekannt .. blinkt und werkelt 10 sek. rot blau dann 10 sek.rot grün dann stet blau
    12. Fehlercode 80010017 (was sagt der eigentlich?)


    falls noch fragen offen sind bitte fragen
    Danke nm dass ihr trotzt Regelverstoß helft
    mfg

  • könnte man SuperSlims downgraden, gäbe es keine ODEs ;)


    bei FW ab 4.55 brauchst du immer eine Swapdisk damit ISOs starten.
    Zudem muss der Swapbypass verlötet sein.


    erstes blinken = Bootdisk muss im Laufwerk liegen was sie ja schon macht wenn du eine ISO ausgewählt hast
    zweites blinken = die Swapdisk muss eingelegt werden
    und danach startet dann die ISO, ausser es sind Spieleupdates installiert, dann musst du nochmal swapen

  • hab ich dass jetzt richtig verstanden?


    Ich muss jedes mal die Swap brennen?
    Swap ist verlötet na klar (alles sauber gelötet sowie auch Swap part 1)


    habe keine spieleupdates installiert oder installieren sich die von selbst?
    sonst alles richtig?
    wie swape ich nochmals?
    rot grünes blinken heißt er findet die Swap nicht, da ja FFLXIII im Laufwerk ist anstatt SWAP.iso?


    Fazit: ich muß die SWAP brennen und einlegen dann sollte es laufen? (auch schon beim boot?)

  • Danke für deine jetzt endlich verständliche Erklärung zur Swapdisk.


    und natürlich auch deiner netten Worte, manche sind halt nicht so versiert.
    dachte Fragen werden noch erlaubt sein, bis ich es auch versteh.
    Oder gibt's in den Regeln ne IQ Anforderung bzw. Mindestwissen??


    hab mich glaube ich mehrmals dafür entschuldigt wie bedankt.


    Hab euch da wohl am falschen Fuß erwischt..
    womöglich lest man sich ja wo anders..


    Somit wünsche ich Euch noch einen wunderschönen Abend mit viel Zucker oben drauf.

  • Hallo nochmal,


    hab jetzt alles sowie Beschrieben gemacht - Swapdisk mit img-burn gebrannt - trotzdem nach Diskwechsel - Fehler 80010017 -
    was mach ich falsch?


    1. einstecken - Stick einstecken - warten bis grün - einschalten - im Browser gemounted


    2. auf Browser spiel (welches sich im PS3_GAMES im root befindet)
    3. stick beginnt zu blinken (Bootcd Zumba Fitness 01159.ird)
    4. stick blinkt nm (cd wechsel Swapdisk)
    5. error 80010017 :(


    Swapdisk erstelle ich mit SWAP Ordner von Cobra ode (über 9000.bin)
    speichere am Desktop und nehme die ird von Zumba bles01159


    bitte um Hilfe - Danke

  • danke für Hilfe


    jop bin auf Firmware 2.2


    cfg:


    ###########################################
    ####### Cobra ODE Configuration file ######
    ###########################################
    # This sample cobra.cfg file lists all the options that the Cobra ODE supports
    # Each option is explained and an example is given
    # Uncomment the option by removing the # in front of it to enable the option
    #
    # Recommended configuration is :
    #manager.type=browser
    eject.on_selection=1
    eject.add_menu=1
    #
    # PS3 superslim users who updated to the 4.55 firmware must also enable the protection bypass
    # and must refer to the user manual for instructions on how to use their ODE on 4.55
    bypass.4.55=1




    ################
    # manager.type
    # Sets the type of manager for game selection.
    # Options are :
    # disabled: Manager is disabled, iso game is loaded directly from game.path option
    # homebrew: Cobra Manager is loaded. Requires manager.iso file (default)
    # custom: A custom manager is loaded. Requires manager.iso file and iso.X options
    # custom: A custom manager is loaded and /COBRA directory is populated. Requires manager.iso file and iso.X options
    # browser: Cobra Browser is generated. Requires browser.iso file
    #manager.type=browser


    ################
    # manager.on_reboot
    # Return to manager mode when the PS3 reboots
    # Default value is 0
    #manager.on_reboot=1


    ################
    # manager.on_eject
    # Return to manager mode when a disc is ejected
    # Default value is 1
    #manager.on_eject=0


    ################
    # game.path
    # Sets the path of the iso to load if manager.type=disabled is set
    #game.path=/PS3_GAMES/game.iso


    ################
    # manager.disctype
    # Defines the type of disc to appear when the manager is loaded
    # This is useful for increased stealth by making the browser appear as a bluray disc
    # or for experimenting with custom managers appearing as ps1 games or DVD movies for example
    # Options are :
    # cd: Appear as a burned CD-ROM
    # dvd: Appear as a burned DVD
    # bd: Appear as a Bluray Disc
    # ps1: Appear as a PS1 game
    # ps2: Appear as a PS2 game
    # ps3 : Appear as a PS3 game (default)
    #manager.disctype=ps3


    ################
    # game.disctype
    # Defines the type of disc to appear when an iso is loaded
    # This is only useful for experimenting with custom types of discs when the game is of a different
    # type. Like for example, a PS2 game appearing as a DVD data disc to explore its content from the XMB
    # Options are :
    # cd: Appear as a burned CD-ROM
    # dvd: Appear as a burned DVD
    # bd: Appear as a Bluray Disc
    # ps1: Appear as a PS1 game
    # ps2: Appear as a PS2 game
    # ps3 : Appear as a PS3 game
    # If the value is not set, the default setting will depend on the type of iso being loaded
    #game.disctype=ps3


    ################
    # iso.X.sector
    # Set a custom trigger sector in the manager to load the iso specified at X.
    # Up to 500 iso can be specified and the sector value specified must be in hexadecimal
    # Only valid when manager.type=custom or manager.type=custom+homebrew
    #iso.0.sector=A00


    ################
    # iso.X.path
    # Set the path of the iso to load when the associated sector is trigger.
    # Up to 500 iso can be specified and the sector value specified must be in hexadecimal
    # Only valid when manager.type=custom or manager.type=custom+homebrew
    # Options are :
    # dvd: Iso is a DVD Movie
    # bd: Iso is as a BD Movie
    # ps1: Iso is a PS1 game
    # ps2: Iso is a PS2 game
    # ps3 : Iso is a PS3 game (default)
    #iso.0.path=/PS3_GAMES/game.iso


    ################
    # iso.X.type
    # Set the type of the iso to load when the associated sector is trigger.
    # Only valid when manager.type=custom or manager.type=custom+homebrew
    #iso.0.type=ps3


    ################
    # eject.sector
    # Set a custom trigger sector in the manager to enable the auto-eject feature.
    # The sector value specified must be in hexadecimal
    # Only valid when manager.type=custom or manager.type=custom+homebrew
    #eject.sector=B800


    ################
    # hdd.poll
    # Set the interval in seconds for the ODE to poll the HDD to prevent it from idling.
    # Set to 0 to disable the feature. Default value is 1
    #hdd.poll=10


    ################
    # game.type
    # Defines the type of game of the iso specified in game.path if manager.type=disabled is set
    #
    # Options are :
    # dvd: Iso is a DVD Movie
    # bd: Iso is as a BD Movie
    # ps1: Iso is a PS1 game
    # ps2: Iso is a PS2 game
    # ps3 : Iso is a PS3 game (default)
    #game.type=ps3


    ################
    # disc.unsupported
    # Disables the "Inserted disc is not supported by the COBRA database"
    # Is useful for switching to a PS2 game or dumping an unsupported game
    # If the disc is not supported in the database, the game will not launch.
    #disc.unsupported=ignore


    ################
    # eject.add_menu
    # Adds a menu to the XMB when a PS3 game is loaded to return back to the manager
    # This is useful for superslim users who do not have the "Remove Disc" option in XMB
    eject.add_menu=1


    ################
    # game.pt
    # Forces the ODE to work in Passthrough Mode
    #game.pt=1


    ################
    # eject.delay
    # Specify the delay in milliseconds between the moment the disc is ejected and the moment the
    # disc is reloaded into the tray for QSB systems (2k, 2k5, 3k and 4k)
    # The default value is 1000ms
    #eject.delay=1000



    ################
    # leds.disable
    # Disable a LED color. This is useful for people who find the LED annoying when trying to sleep
    # Disabling one color can affect combined colors. For example, when loading a DVD movie
    # which shows a white LED (green, red and blue), disabling the green LED will show a
    # purple (blue, red) color instead.
    # Options are :
    # 0: No color disabled (default)
    # 1: Disable blue LED
    # 2: Disable red LED
    # 3: Disable blue and red LED
    # 4: Disable green LED
    # 5: Disable green and blue LED
    # 6: Disable red and green LED
    # 7: Disable all LED colors
    leds.disable=2


    ################
    # bypass.4.55
    # Bypass the new 4.55 firmware authentication on superslim models. Refer to the user manual for
    # instructions on how to bypass the new authentication system
    bypass.4.55=1



    ################
    # mcu.underclock
    # Underclock the MCU to 180MHz. This will make the ODE use less power and generate less heat.
    # This can be helpful if your ODE heats up and freezes often.
    # By default, the MCU runs at 270MHz.
    #mcu.underclock=1



    probiers auch mal mit SWAP (5600 eboots) Bypass 1.2
    Danke mal im Voraus


    edit: habs mit den eboots von bypass 1.2 probiert -- 80010017

  • Hi Leute,


    muss da mal kurz zwischen Funken da ich auch ein Problem mit der Fehlermeldung 80010017.


    Mein System:


    Super Slim 4004B
    OFW 4.53
    Cobra Ode Board v5.1b


    Da ich noch auf 4.53 bin und auf gar keinen Fall Updaten möchte aber weiterhin aktuelle Spiele spielen möchte habe ich mir gestern The Evil Within gehollt.
    Diese in meinen ASUS BD-Brenner gestopft mit Genps3iso eine .iso erstellt und mit hilfe des ISO_TOOLS auf 4.53 gepatched.
    Leider bekomm ich mit der ISO die Fehlermeldung 80010017.
    Hab das ganze noch auf weiß nicht welchen Wegen versucht, aber immer mit dem selben Ergebnis.


    Um das Patch-Tool auszuschließen hab ich das ganze nochmal mit GTA5 versucht aber auch hier ohne Erfolg.


    Bisher hab ich mir die kopien von meinen Spielen meist als fertige ISO aus dem Netz besorgt um mir die Arbeit zu sparen aber das Herstellen einer eigenen Kopie scheint nicht so ganz zu klappen.


    Was mach ich bloß falsch??


    Mit freundlichem Gruß
    Jarney

  • @ Jarney
    Selbst wenn du die Originalen zuhause hast, ist das besorgen der Kopien aus dem Internet illegal, also vorsicht !!
    Und, soweit ich weiß, gibt es noch kein BD-Laufwerk, womit du die Spiele ohne Fehler auslesen kannst. Dieses muß, sofern ich mich nicht ganz täusche, über die PS3 gemacht werden.
    bzw so:
    [Tutorial] 3k3y Ripp3r v2 by Gamers RS


    apollo
    Vielleicht liegt der Fehler ja auch an deiner Spielequelle...

  • Jarney kein Support für Warez! Wie kannst du dir eine Kopie mit einem originalen Brenner erstellen? Es gibt keinen einzigen BD Drive der es auslesen kann, nur der 3k3y Ripper kann es und einem original Drive von Konsole ;)


    apollo soweit ich noch in Errinerung habe, brauchst du 1.1 Software


    Code
    https://www.dropbox.com/s/niiz77lcz9u1ty8/Cobra_ODE_Bypass_455_v1.0_only_2.0_Update.rar?dl=0
  • Okay sry das wusste ich nicht.


    Naja ich mein wenn ich es den hinbekommen würde mit dem selbst erstellen könnte ich dies in Zukunft ja machen.


    Aber so wie ich das jetzt verstehe bedeutet das ich muss mir diesen 3k3y Ripper besorgen und ein weiteres PS3 LW von einer FAT oder SLIM und dann könnte ich selbst ISO´s erstellen einen anderen Weg ausser des illegalen gibt es z.Z. nicht richtig.

Jetzt mitmachen!

Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!