8Bitdo SF30 und SN30 ab sofort vorbestellbar ! Erscheint am 10.12.2017

  • 8Bitdo ab sofort vorbestellbar bei Amazon.com und Amazon.US


    • Ultra-compatible with Nintendo Switch, Windows, macOS, & Android
    • Rumble vibration, Motion controls, USB-C
    • Wireless Bluetooth and direct USB connectable with built in lithium ion battery
    • D-Input and X-Input functionality


    Link :


    https://www.amazon.com/dp/B0748S3GXG?th=1

  • Ich hatte mir bei Everdrive Shop 8bitdo FC30 pro Controller gekauft, damit er bei der Switch funktioniert und die PC Firmware 4.0 draufgemacht. Vor dem Switchupdate 4.0.0 konnte ich den Controller noch per Bluetooth synchronisieren und Controller verbinden. Seit dem Update 4.0.0 kann ich nur noch synchronisieren, aber der Controller baut keine Verbindung zur Switch auf, trotz neustarten der Konsole.


    Aber der Controller funktioniert per USB auch bei der Fire TV, für die Switch muss ich immer wieder probieren.

  • Hast du die neue Firmware drauf von 8bitdo ?


    Hast du das probiert


    • Make sure the controller is charged.
    • Make sure the controller is off (hold the power button for 5-10 seconds if you can get it to light up with any other buttons).
    • Turn it on, holding Y.
    • With Joycon or Pro Controller, go to the Switch grip/order screen.
    • Hold the sync button on the controller for a couple of secs or so (sometimes I hold the shoulder buttons a bit as well, just to be sure).
    • The controller should register as a Pro Controller


    Danke für den Tipp das habe ich noch nicht bemerkt ! Stimmt steht bis Firmware 3.0.0 auwe jetzt bin ich unsicher ob ich sie doch wieder stonieren soll mmhh



    http://www.8bitdo.com/sn30-sf30/


    Wohl mit kabel stört mich gar nicht so ! Kannst du es mal mit deinen testen ob es per USB funktioniert


    Notfalls hätte ich e den COOV Converter glaube mit den sollte es dann auch funktionieren


    Wohl hier steht wird immer mit neuen updates versorgt auch für die switch ! Ich lasse sie mal vorbestellt



    Übrigens Hier ist er billiger ich habe ihn auch von uk sind ca mit versand 49 ,- euronen


    https://www.amazon.co.uk/8Bitd…35&sr=8-1&keywords=8bitdo


    Bezahlen geht mit Kreditkarte oder einer paysafe mastercad etc

  • Ich probiere es später mal aus. Ich hab zwei controller von 8bitdo. Mal sehen, ob meine Switch die noch erkennt.


    Ich habe meine von AliExpress zusammen für 40 € bekommen :nono:


    Edit: Ich habe die Systemsoftware 4.0.1 installiert. Die Controller haben jeweils das Update auf 4.01 bekommen.
    Sie funktionieren und werden an meiner Switch erkannt.
    Die Controller werden nicht sofort angezeigt, sondern benötigen ca. ne halbe Minute um bei mir an der Switch erkannt zu werden.


    Und die Controller werden bei der Switch über die Funktion „Griffweise/Reihenfolge ändern“ erkannt


    Bitte wundert euch nicht, dass der Controller mit den Sticks mal leuchtet und mal nicht leuchtet. Die Leds gehen immer an und aus (so ne Art blinken)


  • Danke für den Link, habe nun für mein Controller FC30 pro von Firmware 4.0.0 auf 4.0.1 aktualisiert. Funktioniet wieder.

  • Countdown läuft 3 Tage noch ! Kanns kaum erwarten den SN30+SF30 in der Hand zum halten (wie früher) ! Sage bescheid sobald sie da sind !


    P.s. Kommen beide auf ganz genau mit Versand bei UK auf 97,57euro


    Freue mich und werde berichten


    Warte ja schon lange drauf und habe beide schon lange vorbestellt bei Amazon


    Hoffe sie schicken ihn heute los da es ja 3-5 Tage dauert der Versand !


    Hier noch die Beschreibung


    Xpad APP und Android app


    8Bitdo_XPad_Win_V2.3.1.zip


    8Bitdo_XPad_MacOS_V2.3.zip


    SN30+SF30_Manual_V4.pdf


    Und hier die Android APP


    8Bitdo_APP_v1.6.2.apk.zip




    :thumbup: :) UPDATE UPDATE UPDATE =O :P :thumbup:



    Und los gehts habe email bekommen : Bild Update :grinn:



    Liefertermin: Mittwoch, 13. Dezember 2017 - Freitag, 15. Dezember 2017 um 20:00 Uhr


    Hauptsache bis Weihnachten sind sie da ! Kann es nicht mehr erwarten :ll:

  • Freitags sind sie bei mir ! Bilder hatte ich vergessen von Auslieferung ! Kommen mit der post was mir e am liebsten ist da ich meinen postler kenne ! :)




    Hier nochmals die Firmwaren:


    V1.10


    Firmware v1.10



    1.Fixed it will crash when using NFC on SWITCH mode.
    2.Fixed it will not sleep when Bluetooth connection.
    3.Change the speed of TURBO to 20FPS.
    4.Fixed without vibration problem when work on Bluetooth Xinput mode.
    5.Fixed input lag problem when work on SWITCH mode


    Firmware v4.01



    Firmware 4.01
    Fixed input lag problem when used with other controllers.
    Firmware 4.0 represents a significant update to all 8Bitdo controllers. It changes the way they operate and offers additional support.
    1. There are now four unique modes:Android (D-Input, default mode) Hold START for 1 second, LEDs will blink once per cycle.
    Windows (X-Input): Hold START + X for 1 second, LED will blink twice per cycle.
    macOS: Hold START + A for 1 second, LED will blink three times per cycle
    Nintendo Switch: Hold START + Y for 1 second, LED will blink four times per cycle.
    Note
    - When connecting a SN30 to a Nintendo Switch in Switch Mode, DOWN+SELECT = Switch HOME button.
    - iCade mode and Keyboard mode are no longer active in Firmware 4.0, please download and install Legacy firmware for this functionality
    - Download the 4.0 manual from support.8bitdo.com for more details
    Immer Updatebar


    V4.1.1 sollte auch bald kommen


    So abwarten und Tee trinken bis freitags den 15.12.17 ! :P :kaffee:


    V1:


    SN30pro+SF30pro_Firmware_V1.10.zip


    V3: ( Legacy :(


    SN30+SF30_Firmware_Legacy_V3.00.zip


    V4.0:


    SN30+SF30_Firmware_V4.00.zip


    V4.0.1


    SN30+SF30_Firmware_V4.01.zip

  • Kommen heute schon an ! Gegen 8-11 uhr ! Ging schneller als erwartet !


    Amazon UK hat bereits 5 volle Sterne auf die 8Bitdo ! War klar für mich und das schon seit Juli das sie 5 Sterne wert sind ! Werde noch 2 x nach bestelln so das ich dann 4x habe !


    Pro und joy cons habe ich seit Monaten nicht mehr da immer nur Probleme ! Spiele nur mit coov Adapter und ps4 - xbox one controller und endlich kommen mal gescheite auch wenns net von Nintendo sind sondern von 8Bitdo ! Feeling wie damals .






    Sind angekommen ! Einfach Top ! Das feeling ist der Hammer ! Liegt top in der Hand !


    Der SF30 ist von der farbe her etwas dünkler !


    Funktioniert tadellos mit der Switch , Ios , und pc !


    Auch mit der Switch Firmware 4.1 ! Wird auch immer mit updates versorgt !


  • ACHTUNG ES GEHT NUR NOCH MIT DER SOFTWARE V1.20 DAS UPDATE ALLE ANDEREN FÜR SN30+SF30 GEHEN NICHT MEHR ! DIE ANDEREN FUNKTIONIEREN NICHT MEHR !


    FIRMWARE AKTUELL : NEU ! V 1.20


    SN30pro+SF30pro_Firmware_V1.20.zip




    Firmware v1.20


    [*]Significant vibration optimization



    Firmware v1.10
    [*]Fixed the crashing issue of the controller when Amiibo function is applied.
    [*]Added sleep mode to the controller during its Bluetooth connection.
    [*]Changed the Turbo speed when used to 20FPS.
    [*]Added vibration function to the controller when it is on X-input mode.
    [*]Fixed the latency issue when it is used with Switch.


    -------------------------------------------------------------------------------------------------------------




    Firmware update instruction
    1.Download the firmware file first from http://support.8bitdo.com/
    2.Press and hold L1+R1+START buttons on the controller to put it on its update mode. LED on the top will blink in red.
    3.Connect the controller to your Windows or macOS via the USB-C cable.
    4.Click on “USB Upgrade” on your device, search for bluetooth_firmware.dat in the pop-up window and run it;
    5.Un-plug the gamepad when the upgrade process is done, then restart it before using.



    Instruction for using with 8Bitdo retro receivers
    1.Update the firmware of the retro receiver you have to its latest version v1.08.
    2.2.Press START+B to turn on your SN30 Pro/SF30 Pro controller on its Android mode

  • UPDATE 1.22



    Firmware v1.22


    Enhanced the stability of the Bluetooth pairing.
    Fixed the crashing issue of the controller when charging.





    It will disconnect from bluetooth connection when using USB connection.





    SN30pro+SF30pro_Firmware_V1.22.zip

  • Firmware v1.23


    Enhanced vibration optimization on Xinput mode.
    Added USB connection to Mac mode.
    Fixed the bug that the controller would not turn on occasionally.


    * Press and hold L+R and then plug in USB cable to update the controller if it does not power on.


    SN30pro+SF30pro_Firmware_V1.23.zip

  • Tut er ;)


    EDIT: Es dauert immer unterschiedlich lange, bis der Controller sich mit der Switch verbunden hat (Habe ich auch hier vor nem Jahr mal geschrieben)


    Auf Youtube habe ich noch ein Video gefunden, wo der Sprecher zeigt wie man einen N30 Pro mit der Switch verbindet.


    Externer Inhalt www.youtube.com
    Inhalte von externen Seiten werden ohne Ihre Zustimmung nicht automatisch geladen und angezeigt.
    Durch die Aktivierung der externen Inhalte erklären Sie sich damit einverstanden, dass personenbezogene Daten an Drittplattformen übermittelt werden. Mehr Informationen dazu haben wir in unserer Datenschutzerklärung zur Verfügung gestellt.

Jetzt mitmachen!

Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!