ARGON 9 WIRES [d]FINAL[/d] VERSION 1.0 + INFECTUS BOOK
Wir werden den Chip hier bei PS3-Tools.de " Argon SPI " nennen,
damit es keine Verwirrungen mit den unterschiedlichen Updates und Einbauplänen
gibt!
Edit, 08.05.2008: Es sind noch Fehler in der Firmware, das Infectus Team arbeitet an
einer Lösung des Problems.
WICHTIG: der Argon 9 Kabel Version MUSS in der Wii eingebaut sein und die Wii MUSS
Eingeschaltet sein zum flashen des SPI!
Der Programmer MUSS z.Z. auch IMMER am Flachbandkabel angeschlossen bleiben,
damit der Chip funktioniert!
Switch 1 = Off
Switch 2 = Off >>> PAL firmware
Switch 1 = On
Switch 2 = On >>> Modchip disabled
Switch 1 = On
Switch 2 = Off >>> JAP firmware
Switch 1 = Off
Switch 2 = On >>> USA firmware
--------------------------------------------------------------------------------
Good news to all INFECTUS and ARGON users...
For infectus users there is finally online under TUTORIALS a nice "INFECTUS BOOK", over
100mb of tutorials to understand well how is possible to do with INFECTUS ! direct link
here: http://www.infectus.biz/downlo…us_and_Argon_Tutorial.zip
For ARGON SPI FLASH users finally is online the new firmware 9 wires !
Here the link for direct download:
[d]http://www.infectus.biz/downloads/WASABUS-argon-1.0.rar[/d]
Feedback are welcome
Quelle:INFECTUS TEAM
INFECTUS TEAM - ARGON SPI - 9 WIRES FIRMWARE 1.0
IMPORTANT NOTE: The firmware WASABUS can be installed in ARGONSPI only if is
FIRST installed on WII and during the upgrade process the WII is turned ON. This
issue will be fixed in the next release to allow users to program ARGON SPI stand
alone.
In this ZIP fill you will find these things:
1- INFECTUS PROGRAMMER, beta version to manage correctly ARGON SPI update
2- wasabus_argon.bin, this is the firwmare that is necessary to flash inside the SPI
flash of ARGON
3- wasabus_a125argon.dat / wasabus_a250argon.dat, these are the new ACTEL
firmware to support 9 wires installation
Please read "PROCEDURE TO PROGRAM ARGON SPI.DOC" for update your argon
correctly to 9 wires.
WASABUS debug LEDS:
The LED on the ARGON will show you if modchip is correctly working or not, is very
simple
LED OFF = Don't works
LED ON = Code injection procedure is complete
REGIONAL SETUP:
Current firmware is setup by default like PAL.
To setup the other region just shortcut the pads W and R in this way:
Both to GND = modchip OFF
W to GND = JAP
R to GND = USA
Note: injectus don't works anymore in this version like configurator with switches and
leds, for a problem develope. We are working on that. If there are problems with
modchip we suggest to don't connect injectus when modchip is working in the console.
KNOW ISSUES:
1- In few consoles we saw a deleay to recognize a new disk inserted, like 4/10
seconds before the disk spin... is it normal. we are working to fix this little problem
2- Upgrade process works only with ARGON SPI is installed and WII turned ON
------
THANX FOR ALL
INFECTUS TEAM
