Wii - WiiD

sieht sehr billig verarbeitet aus und nach ein clone von Cyclo Wiz

Preis fehlt noch
$39.95. knapp 35 Euro

die Liste liest sich wie beim Wiikey.

PS: habs in Wii Modchips verschoben, eine News sind Wii Chips nicht mehr Wert, gibt schon zu viele....

kann auch nicht mehr als die anderen!!!

und ist wirklich ein Wiikey Clone...

Zitat

Ab Sofort nehmen wir Vorbestellungen für den neuen WiiD-
Chip an. Dieser Chip, hergestellt von einem der führenden Modchip-
Hersteller ?(, wird in 9 Tagen veröffentlicht und verspricht eine
hochqualitative und verbesserte Version des WiiKey zu sein.

Da fragt man sich was an dem Chip Hochwertig ist.

führenden Modchip-Hersteller, wenn dem so wäre würden die doch ihren Namen nennen oder nicht

Na

Da bau ich mir doch lieber nen Chiip selber und der sieht dann auch noch besser aus

Erstes Update ist jetzt Verfügbar

Zum Download

Non Swap/Direct Boot for Wii backups.
Non Swap/Direct Boot for GC backups
Non Swap/Direct Boot for Homebrew in GC mode
Non Swap/Direct Boot for NTSC region Wii games/backups on US and JAP consoles
Boots PAL Backups/Originals on NTSC WII consoles (partially without swapping)
Boots NTSC Backups/Originals on PAL WII consoles (partially without swapping)
Boots different region GC Games Original/Backups Imports (partially without swapping)

EUROPE/USA/JAPAN Wii Console Supported
Double soldering option, 6 wires or Quicksolder (No wires Required)!
Compatible with all the WII Console Versions/Drive currently available
Full D2B Drive Support
Built-in audio fix
Full support for DVD-R/DVD+R and DVD+RW/DVD-RW without Booktype
Supports Multi-Disc games for both Wii and Gamecube
Recovery Mode for incomplete/Bad Upgrades
Stealth mode
Firmware fully Upgradable by DVD!

.:-:. Firmware Upgrades
WIID Firmware 02!

This Firmware will:
1) add Region Free capability to your WII
2) correct any issues with "GCOS SELFBOOT MULTIVER" v2 and v3 and audio streaming games.

The Upgrade Instructions are inside the .ZIP File!

Für Pal Wii, WiiD Update 0.2

.:-:. WIID FEATURES

Non Swap/Direct Boot for Wii backups.
Non Swap/Direct Boot for GC backups
Non Swap/Direct Boot for Homebrew in GC mode
Non Swap/Direct Boot for NTSC region Wii games/backups on US and JAP consoles
Boots PAL Backups/Originals on NTSC WII consoles (partially without swapping)
Boots NTSC Backups/Originals on PAL WII consoles (partially without swapping)
Boots different region GC Games Original/Backups Imports (partially without swapping)

EUROPE/USA/JAPAN Wii Console Supported
Double soldering option, 6 wires or Quicksolder (No wires Required)!
Compatible with all the WII Console Versions/Drive currently available
Full D2B Drive Support
Built-in audio fix
Full support for DVD-R/DVD+R and DVD+RW/DVD-RW without Booktype
Supports Multi-Disc games for both Wii and Gamecube
Recovery Mode for incomplete/Bad Upgrades
Stealth mode
Firmware fully Upgradable by DVD

.:-:. WIID Instructions

Normal operation :
---------------------------

Just turn on your console as normal. Wiid operation is completely transparent and will turn on only when a backup disc is inserted.

Firmware update :
--------------------------

- Burn the firmware upgrade iso image to DVD-R/+R/-RW/+RW - Turn on the Wii console without any disc inside and go to the Disc Channel.
- Insert the firmware upgrade disc.

The disc will spin for a few seconds while the firmware is being upgraded and will finally stop.
A message on the screen will say "Unable to read the disc".
This is completely normal and signals that the firmware update operation has been completed.

Firmware recovery :
----------------------------

If for any reason you want to restore your Wiid to your default factory configuration use the following procedure.
Note : wire D needs to be soldered for the recovery procedure to be effective!

- Press and hold the RESET button on your wii.
- Turn on the Wii by pressing the power button either on the Wii console or on the Wii remote while keeping the RESET button pressed.
- Wait 15 seconds and release the RESET button.

All firmware upgrades including region settings are now removed and your Wiid has been restored to the factory configuration.

Complete disable :
---------------------------

Wiid automatically turns itself off when an original disc is inserted.
If for any reason you want to completely disable the chip use the following procedure.
Note : wire D needs to be soldered for the disable procedure to work!

- Press and hold the RESET button on your wii.
- Turn on the Wii by pressing the power button either on the Wii console or on the Wii remote while keeping the RESET button pressed.
- Wait 3 seconds and release the RESET button.

Wiid is now completely disabled.
Turn your Wii OFF and ON again to restore normal chip functionality.

Seit Monaten KEIN Support mehr vom Hersteller!!!

Super Mario Galaxy läuft mit dem WiiD noch NICHT!!!

Edit: aber jetzt...
WIID Firmware v03