sieht ja schick aus die neue supercard... die anleitung die beiliegt ist nur etwas spärlich. kann mir jemand sagen wo die plugins hinkopiert werden müssen?
Supercard DSTWO Modul
-
- [DS_3DS]
- didi1000
-
-
Entpacken und die Ordner (_dstwoplug ist auch dabei) ins Root der SD Karte kopieren.
-
mann das war ja schnell... danke jetzt funzt es
-
PS3-tools und alles wird gut.
-
Die "ds2update.dat" wird zusätzlich ins Hauptverzeichnis der Speicherkarte kopiert.
Diese wird beim einschalten automatisch erkannt.Vorraussetzung für den Patch ist die Firmware DSTWO V1.11!
-
Als erstes wird die SD Karte in FAT/ FAT32 formatiert.
Danach wird die Software auf die SD Karte kopiert.
Diese besteht aus dem Ordner "_dstwo".Wenn bei neuen Karten das Fish Tycoon nicht in der Konsole erscheint, fehlt der Core!
Dazu noch die Datei "ds2boot.dat" mit auf die SD Karte kopieren und diese Prozedur ausführen.ZitatSome New DSTWO carts have no fireware, you need to write in it by yourself before using. This is the way:
For NDSi/NDSiXL/NDSiLL:
1, copy the correct _dstwo folder and ds2boot.dat file to the root of your microsd card.
2, insert DSTWO into your console. Boot the console, dont turn off it untill you see the DSTWO cart LOGO(the logo of Fish Tycoon, maybe need about 1 minute). Then re-boot your console.For NDS/NDSL:
1, copy the correct _dstwo folder and ds2boot.dat file to the root of your microsd card.
2, insert DSTWO into your console. Boot the console, then re-boot when you entered the menu of NDS. -
Die "ds2update.dat" wird zusätzlich ins Hauptverzeichnis der Speicherkarte kopiert.
Diese wird beim einschalten automatisch erkannt.Vorraussetzung für den Patch ist die Firmware DSTWO V1.11!
-
Als erstes wird die SD Karte in FAT/ FAT32 formatiert.
Danach wird die Software auf die SD Karte kopiert.
Diese besteht aus dem Ordner "_dstwo".Wenn bei neuen Karten das Fish Tycoon nicht in der Konsole erscheint, fehlt der Core!
Dazu noch die Datei "ds2boot.dat" mit auf die SD Karte kopieren und diese Prozedur ausführen.ZitatSome New DSTWO carts have no fireware, you need to write in it by yourself before using. This is the way:
For NDSi/NDSiXL/NDSiLL:
1, copy the correct _dstwo folder and ds2boot.dat file to the root of your microsd card.
2, insert DSTWO into your console. Boot the console, dont turn off it untill you see the DSTWO cart LOGO(the logo of Fish Tycoon, maybe need about 1 minute). Then re-boot your console.For NDS/NDSL:
1, copy the correct _dstwo folder and ds2boot.dat file to the root of your microsd card.
2, insert DSTWO into your console. Boot the console, then re-boot when you entered the menu of NDS. -
Was wurde Verbessert ?
-
Steht in der Readme.
Update: 2011-6-30
the support for the latest NDSI 1.4.3 system. -
[Blockierte Grafik: http://kamia.de/mi/04.png]
-
Das wird leider von der DB nicht übernommen.
ZitatDamit wird die Karte im DSi/ DSi XL mit FW1.4.3 erkannt
-
Als erstes wird die SD Karte in FAT/ FAT32 formatiert.
Danach wird die Software auf die SD Karte kopiert.
Diese besteht aus dem Ordner "_dstwo". -
Die "ds2update.dat" wird zusätzlich ins Hauptverzeichnis der Speicherkarte kopiert.
Diese wird beim einschalten automatisch erkannt.Vorraussetzung für den Patch ist die Firmware DSTWO V1.11!
-
Als erstes wird die SD Karte in FAT/ FAT32 formatiert.
Danach wird die Software auf die SD Karte kopiert.
Diese besteht aus dem Ordner "_dstwo". -
Als erstes wird die SD Karte in FAT/ FAT32 formatiert.
Danach wird die Software auf die SD Karte kopiert.
Diese besteht aus dem Ordner "_dstwo".Wenn bei neuen Karten das Fish Tycoon nicht in der Konsole erscheint, fehlt der Core!
Dazu noch die Datei "ds2boot.dat" mit auf die SD Karte kopieren und diese Prozedur ausführen.Zitat
Some New DSTWO carts have no fireware, you need to write in it by yourself before using. This is the way:For NDSi/NDSiXL/NDSiLL:
1, copy the correct _dstwo folder and ds2boot.dat file to the root of your microsd card.
2, insert DSTWO into your console. Boot the console, dont turn off it untill you see the DSTWO cart LOGO(the logo of Fish Tycoon, maybe need about 1 minute). Then re-boot your console.For NDS/NDSL:
1, copy the correct _dstwo folder and ds2boot.dat file to the root of your microsd card.
2, insert DSTWO into your console. Boot the console, then re-boot when you entered the menu of NDS. -
Die "ds2update.dat" wird zusätzlich ins Hauptverzeichnis der Speicherkarte kopiert.
Diese wird beim einschalten automatisch erkannt.Voraussetzung für den Patch ist die Firmware DSTWO V1.11!
-
Die "ds2update.dat" wird zusätzlich ins Hauptverzeichnis der Speicherkarte kopiert.
Diese wird beim einschalten automatisch erkannt.Voraussetzung für den Patch ist die Firmware DSTWO V1.11!
-
Die "ds2update.dat" wird zusätzlich ins Hauptverzeichnis der Speicherkarte kopiert.
Diese wird beim einschalten automatisch erkannt.Voraussetzung für den Patch ist die Firmware DSTWO V1.11!
-
Die "ds2update.dat" wird zusätzlich ins Hauptverzeichnis der Speicherkarte kopiert.
Diese wird beim einschalten automatisch erkannt.Voraussetzung für den Patch ist die Firmware DSTWO V1.11!
Jetzt mitmachen!
Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!