ZitatOriginal von TheMafia
cechk04 80 gb?
von der ließt man nie was
Die habe ich Aber ich trau mich noch nicht sie zu flashen =(
ZitatOriginal von TheMafia
cechk04 80 gb?
von der ließt man nie was
Die habe ich Aber ich trau mich noch nicht sie zu flashen =(
ZitatOriginal von Gamer-D
Ich hab ne Slim CECH 2504A... Würde es probieren nur wenn ich brick hätte wie könnte ich das beheben
Gamer habe dir doch geschrieben werd mich melden so mit Erfolg . Vampie nimm mal in die Liste auf bitte
PS3 Slim 160Gb CECH 2504A ---> Lääuft
Hi zusammen habe die CHECH A01 NTSC Fat 60 GB hab noch nichts gelesen noch trau ich mich net^^....weil die Serie wahrscheinlich zu 100 % brickt
Hallo,
das Model CECH-2504A 160GB wurde erfolgreich mit CFW 3.55 geflashed. Jedoch geht leider BlueRay nicht mehr
Gruß, Valle
Bin mal gespannt wieviele gebrickte Konsolen bei Ebay landen werden. Denke nicht das man den Brick wieder wegbekommt oder glaubt ihr wird es eine Unbrick Lösung geben?
ZitatOriginal von TheMafia
guck doch oben
Die geht ich hab eine und die geht !
Hast du sie über recovery oder übers systemupdate geflasht?
ZitatOriginal von StonyD
wie siehts aus mit SLIM (120GB) CECH 2104 A
Gerade nach Hause gekommen, in Ubuntu gepatcht und funzt
So, bin auch endlich fertig.
CECHL04, läuft alles
[d]BD-Playback funktioniert auch noch bestens ^^[/d]
Hat sich grade erledigt
Nach 2 mal Neustarten wollen die nu auch nicht mehr
AAAAAAAAAAAAAAAAAAAAAAaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAaaaaaaaaaaAAAAAAAAAAAAAAAAAAAAAAAAAAAAa:suicide: soooooooooooooooooooooooooooooooo eineee Scheiße alles am blinken blinkt ROT meine PS3 CECH-H 04 Geht nicht mehr an sieht aus als hätte die ein Ylod Fehler Rot gelb
weiß einer weiter ? oder Ich hol mir morgen eine neue die hat 4 jahre ihren Dienst erwiesen.....und Ich sag euch den Scheiß mach Ich nicht noch einmal
Es gibt derzeit keine Lösung für einen Brick dieser Art weil der USB nichtmal arbeiten kann da die Konsole gleich wieder ausgeht
Deine Version sollte aber funktionieren hat doch schon jemand geschaft hier im Forum
Wer seine PS3 gebrickt hat gibt es eine Lösung. Aber keine Garantie ob es klappt.
Hab mal aus Forum rauskopiert!
Kurz und knapp Ja lösung gibts schon
Gibt schon lösungversuche kein Garantie das es auch bei dir klappt
I found this posted on another forum, just a little comfort for people who have bricked, although none of it is confirmed, hold tight
"Good news foreros:
It is possible to get rid of the brick to update wanikoko.
How? ... needed if or if an USB dingle (ps3key, etc )
1) Put the console via a USB factory jig
2) We will put in the update root 3.55 (PS3UPDAT.PUP) and also lv2diag of naima.
3) Turn on the ps3 and see what the stick flashes ... let them set up well.
4) There will come a time when the green LED will start blinking ps3 indefinitely, turn off the PS3 and removed the jig.
5) light the ps3, and if everything went well we usually turn on the red box showing us the factory mode.
6) Turn off ps3, remove the state of factory mode, and turn on.
solved.
At around 19:00 I'll upload a toturial on how to perform the process and install the CFW of the first wanikoko Chony firmware 3.55)
patience that all is not lost
ps I have again and PS3. ole, oleeeeeeeeee"
CECH-L 04 80GB ohne Probleme mit der CFW, Blu-Ray keine Ahnung, die Kiste hat schon ne Weile kein funktionierendes Laufwerk mehr
Hab zwar noch eine CECH-L 04 80GB, die bleibt aber vorerst auf 3.41, bis etwas mehr Klarheit in die ganze Sache gekommen ist.
ZitatAlles anzeigenOriginal von Deafmobil
Wer seine PS3 gebrickt hat gibt es eine Lösung. Aber keine Garantie ob es klappt.
Hab mal aus Forum rauskopiert!
Kurz und knapp Ja lösung gibts schon
Gibt schon lösungversuche kein Garantie das es auch bei dir klappt
I found this posted on another forum, just a little comfort for people who have bricked, although none of it is confirmed, hold tight
"Good news foreros:
It is possible to get rid of the brick to update wanikoko.
How? ... needed if or if an USB dingle (ps3key, etc )
1) Put the console via a USB factory jig
2) We will put in the update root 3.55 (PS3UPDAT.PUP) and also lv2diag of naima.
3) Turn on the ps3 and see what the stick flashes ... let them set up well.
4) There will come a time when the green LED will start blinking ps3 indefinitely, turn off the PS3 and removed the jig.
5) light the ps3, and if everything went well we usually turn on the red box showing us the factory mode.
6) Turn off ps3, remove the state of factory mode, and turn on.
solved.
At around 19:00 I'll upload a toturial on how to perform the process and install the CFW of the first wanikoko Chony firmware 3.55)
patience that all is not lost
ps I have again and PS3. ole, oleeeeeeeeee"
funzt nicht
da sobald die ps3 angeschaltet wird sie sofort grün-->gelb und dann rot blinkt.
lüfter geht aus ,piept kurz und dann war es das.
mann kann nicht mal den power knopf solange gedrückt halten damit sie in den recovery modus geht.
Auf der CECHH04 20gb funktioniert es.
Laut anderen foren.
nee funtzt nicht keine chance da etwas momentan zu machen.komm ja nicht mal mehr ins RECOVERY MENUE wer ja geil wenn das klappen würde am nee geht leider NICHT
ZitatOriginal von Kuku123
Die habe ich Aber ich trau mich noch nicht sie zu flashen =(
Ich habs doch inzwischen geflasht, es geht
erst die Originale 3.55 Firmware von Sony installiert, übers XMB, ( = Ps3 menü)
und die CFW danach per recovery menü
ja genau wie Ich genau wie Ich und morgen kommt ne SLIM INS HAUS
CECH-L 04 80GB läuft
Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!