Warte ich mache gleich ein Foto .ich glaube das sagt es besser als wenn ich das schreibe
Ps3 linux
-
-
Jo nen Bild wäre nicht schlecht.
Dadurch das du die Schritte mit dem preptool durchgeführt hast können wir nun sicher sein das die Partition/VFlash richtig sind.
Du hängst also wieder bei Punkt 8 ?
Anworte am besten auch mal auf die Frage von Max Muster (bzw. die gleiche Frage stellten er UND ich ja gestern schon).
-
ja habe es hin bekommen man war das eine schwere Geburt
-
Und die Lösung des Problems war ?
-
Soll ich das tut hier Posten ist auf englisch ??
-
Jo aber mit Quellenangabe
-
Kommt da noch was ?
-
After you created the 22GB partition did you use "setup_flash_for_otheros.pkg" so it can prepare the stuff for create_hdd_region.sh? It requires that you have "dtbImage.ps3.bin" on the USB (for NOR console) so it can mount the filesystem where "ps3hvc_hvcall" is.
Here is a part from my tutorial for cex/dex, which applies in your case:
I. PREPARATION
* USB required with 1GB free space
* Extract the contents of this package to the root folder of your USB drive
IMPORTANT:
* If your PS3 has NAND flash, remove "dtbImage.ps3.bin" from your USB
and rename "NAND-dtbImage.ps3.bin" to "dtbImage.ps3.bin"* Download and extract RedRibbon Linux (steps 13, 14) to the root folder of your USB drive
1. Go to "System Update" and Install OTHEROS-22GB.PUP from USB (provided as \PS3\UPDATE\PS3UPDAT.PUP in this package)
2. When installation is finished, reboot in "Recovery Mode" and choose "Restore PS3 System" (not the Backup/Restore in XMB)
* To go to "Recovery Menu" turn-off the PS3, press and hold the power button, you will hear ONE beep, then 2 beeps - release the button.3. Now 22GB are reserved for OtherOS
4. Install and run setup_flash_for_otheros.pkg
5. Reboot (It's important to shut down and turn on your PS3)
6. Install and run install_otheros.pkg (Try different USB ports if you don't get any beeps.)
7. Install and run boot_otheros.pkg
8. Install and run reboot.pkg (use the package, do NOT reboot manually)9. You should be in Petitboot now.
10. Quit to Shell and execute create_hdd_region.sh from your USB:
/tmp/petitboot/mnt/sda1/create_hdd_region.sh
or /tmp/petitboot/mnt/sdb1/create_hdd_region.sh
or /tmp/petitboot/mnt/sda/create_hdd_region.sh
or /tmp/petitboot/mnt/sdb/create_hdd_region.shor mount
and look for your USB hdd device in the list and then execute the script (create_hdd_region.sh) from the proper path11. Reboot your PS3
12. From GameOS run "Reboot" to get into Petitboot again (if not already in Petitboot)13. Download Red Ribbon: http://sourceforge.net/projects/redr...5.rar/download
14. Extract the rar and extract the ISO in the root of your USB stick/or burn the image to a DVDII. RED RIBBON INSTALLATION
15. Plug in your USB/Insert the disc in your PS3 and you should see 2 different boot options in Petitboot
Quelle : http://www.maxconsole.com/maxc…g-of-create_hdd_region-sh
-
10. Quit to Shell and execute create_hdd_region.sh from your USB:
/tmp/petitboot/mnt/sda1/create_hdd_region.sh
or /tmp/petitboot/mnt/sdb1/create_hdd_region.sh
or /tmp/petitboot/mnt/sda/create_hdd_region.sh
or /tmp/petitboot/mnt/sdb/create_hdd_region.shwelcher Befehl war es bei dir ?
-
Zitat
Original von schwimmboje
10. Quit to Shell and execute create_hdd_region.sh from your USB:
/tmp/petitboot/mnt/sda1/create_hdd_region.sh
or /tmp/petitboot/mnt/sdb1/create_hdd_region.sh
or /tmp/petitboot/mnt/sda/create_hdd_region.sh
or /tmp/petitboot/mnt/sdb/create_hdd_region.shwelcher Befehl war es bei dir ?
/tmp/petitboot/mnt/sda1/create_hdd_region.sh der war das .. ABER ohne cd davor xD
-
Hey Glückwunsch das es bei dir jetzt läuft
ZitatOriginal von doncalimero
10. Quit to Shell and execute create_hdd_region.sh from your USB:
/tmp/petitboot/mnt/sda1/create_hdd_region.sh
or /tmp/petitboot/mnt/sdb1/create_hdd_region.sh
or /tmp/petitboot/mnt/sda/create_hdd_region.sh
or /tmp/petitboot/mnt/sdb/create_hdd_region.shor mount
and look for your USB hdd device in the list and then execute the script (create_hdd_region.sh) from the proper pathDa steht genau das was Max Muster und ich geschrieben haben
-
sorry ich wollte die ps3 schon rau schmeißen und wie durch Zauberhand habe ich es hin bekommen
eine frage noch kann ich auch ein anderes linux nehmen ? achso und ich hatte die festplatte am pc formatiert -
Ja natürlich kannst du auch andere Linux nehmen, aber das red ribbon ist das am aktuellste und wird auch noch weiterentwickelt (es muss halt auch eine PS3 Version von der Distro geben).
Außerdem hat es auch wichtige Patches vom Grafen usw. mit drin, die alte und "offizielle" Versionen (wie z.B. Ubuntu aus 2010oder das Yellow Dog) nicht haben, daher würde ich bezügl. Performance und Funktion definitv beim red ribbon bleiben.
-
mh.. aber die Performance gefällt mir nicht so . es macht Spaß damit zu arbeiten usw
aber es ist nicht wie Ubuntu -
Zitat
und wie durch Zauberhand habe ich es hin bekommen
Ah ja... Aufmerksamkeitsdefizite lassen sich nur durch mehrfaches Wiederholen ein und der selben Sachen "etwas" ausgleichen. Lesen zum Beispiel. Nirgends stand ein cd vor dem create Befehl.
Zum Thema Performance:
Was erwartest Du? Es gibt immer noch keinen funktionieren nativen Treiber fuer die RSX, die Grafikeinheit. Ein anderes Linux bringt Dir nix. Da is das Red Ribbon mit seinen Patches schon das Beste, wie Fatman schrieb.
Aber: Downgrade ma auf 3.15 und nimm das YLD 6.2, und dann sag ma, wie Du das findest. Besser wirds nicht, bis es einen Treiber fuer den RSX gibt. Und vielleicht ma n RAM Upgrade. Obwohl der E17 eigentlich super laeuft.
-
Nur als kleiner Tipp ich habe Alles gelssen . ich habe es auch versucht um zu setzen . aber eure Tipps haben erst da funktioniert wo ich die Festplatte am PC formatiert habe . und was du mit dein Wort Aufmerksamkeitsdefizite erreichen willst weiß ich nicht . achso sollte ich eventuell groß in meiner Signatur rein schreiben hallo dieser junge hat ADHS ? Ich kann da nichts für das ich so bin wie ich bin außerdem ist das hier ein forum wo man immer gute Hilfe bekommt deswegen ist fragen und schreiben nichts verbotenes
-
Sagt ja auch keiner. Geholfen wird gerne, aber die Hilfe muss auch angenommen werden. Und Feedback waere nett. Du wolltest Fotos machen. Aber egal, hat ja hingehauen. Happy Weekend!
-
ja das mit denn Fotos habe ich vergessen ... aber ich sage es noch mal großen dank an alle die versucht haben mir zu helfen
-
Zitat
Original von doncalimero
/tmp/petitboot/mnt/sda1/create_hdd_region.sh der war das .. ABER ohne cd davor xD
Das ist klar das kein cd davor kommt. cd bedeutet nur "wechsel in Verzeichnis" und damit hätte wir halt sehen können unter welchem sda dein USB Stick gemountet ist.
Ansonsten war ja einfach nur das Script auszuführen, wobei der Befehl natürlich dahin (sda/b 1...) gehen muss wo das Script auch liegt.
-
Das weiß ich jetzt auch ....
Jetzt mitmachen!
Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!