Kempa, thanks for your reply.
The problem is my emunand is a "frankenstein 11.7 emunand", with all the mods we did in this thread.
So some system titles have been modified by 123ab for the GW Select button menu to work, and some to go online.
So I'm afraid because emunand isn't clean it's either not going to install properly or even update properly afterwards.
Have you any experience with that?
GATEWAY emuNAND 11.7.0-40E/U/J (Original GATEWAY Card)
-
- [DS_3DS]
- 123ab
-
-
123ab replaced only the higher sys modules with the sys modules from fw 11.2.
And spoofed them to the higher version.
So that GW is still working.If you do a normal update, they should be replaced.
But if you want to be sure, that all patched files are removed.
You can downgrade with sysUpdater to fw 9.2.
After them update to the latest fw 11.13 -
Thanks, again, for your reply.
The thing is, I think 123ab spoofed the version numbers with the highest possible value, so that they wouldn't update no matter what.If that's the case, a regular fw update via the 3DS built-in feature wouldn't work / update them properly.
Downgrading to 9.2 would restore the sys modules to unhacked modules, but all the other, newer modules (that didn't exist on 9.2) would stay installed and possibly hacked, I'm worried about that too
Have you tried your method on your system, or do you know someone who did?
-
There is nothing to worry about.
If you downgrade to 9.2 and you are safe to update normaly -
omg es ist 2020 und ihr haltet alles am leben. Ihr habt mich echt gerettet. Ich danke euch aus tiefstem Herzen.
-
Was aber schon überflüssig ist da Luma bereits alles kann bzw. besser macht. Aber muss jeder für sich entscheiden.
-
Nach einigem herumprobieren ist es mir gelungen, ein Paket für den O3DS für die neueste Firmware zu erstellen. Da vielleicht auch andere Bedarf haben uploade ich es an dieser Stelle.
Vorgehensweise ist genau die selbe wie bei den Updates von 123AB, ihm gilt der volle Credit hierfür.
Leider funktioniert der HBL Loader nicht mehr auf der aktuellen Firmware (keine Payloads mehr verfügbar). eShop funktioniert ebenfalls nicht, aber Online-Play funktioniert einwandfrei (selbst getestet).
Ein weiterer Tipp: Wenn ihr .cia Dateien installieren wollt, bootet am besten den EmuNAND mit LumaCFW, dann klappen die Setups auch besser (bei mir gingen einige .cia Dateien nur mit Luma installieren, nicht im GW Modus).
Also dann, viel Spaß damit.
emuNAND 11.13.0-45E
GATEWAY emuNAND 11.13.0-45E (old3DS/2DS)
Hinweise:
- Wer bereits die GW Patches von 123AB 11.3.0E /11.4.0E / 11.5.0E /11.6.0E / 11.7.0E verwendet, installiert den Patch zur aktuellen Firmware einfach drüber. (Tutorial Schritt 1 - 4!)
- erstellen eines neuen emuNAND's ist da nicht erforderlich!
- Konsolen mit emuNAND Firmware unter Version 9.0.0-20E, springen direkt zum Schritt "3c" nachdem Schritt 1 - 3 durchgeführt wurde!
Benötigt wird:
- ein Backup des emuNAND (zur Sicherung!)
- ein emuNAND 4.5.0-10E ---> 11.2.0-35E
- das Download Pack:
old3DS/2DS:
---> https://www37.zippyshare.com/v/6OQMVvCq/file.html
Alternative: https://megaup.net/2RmhD/old3DS_GW_v11.13.0-45E.rarTutorial:
1: Inhalt in Root der SD/microSD-Karte (Konsole) kopieren
2: in den GATEWAY emuNAND booten
3: die sysUpdater v0.4.2.cia installieren
3b: sysUpdater starten und drücken, warten bis es fertig ist....
3c: Konsole ausschalten den updates Ordner löschen ---> updates (update!) umbenennen in updates
3d: booten in GATEWAY emuNAND ---> sysUpdater starten ---> drücken ---> warten bis es fertig ist....
4: Der emuNAND ist nun aktuell auf 11.13.0-45E. (kein Internet erforderlich!) -
Gateway ist doch schon längst outdated? Warum also noch nutzen?
-
Es ist günstiger 2 kleinere Micro SDs zu verwenden als sich eine große zuzulegen. Ich hatte noch 2 64GB Karten die ich sonst für nichts brauche, also ist es so einfacher die Games auf 2 zu splitten.
Einfacher Grund eigentlich.
-
Wird es auch noch eine Version fur den N3DS geben?
Nach einigem herumprobieren ist es mir gelungen, ein Paket für den O3DS für die neueste Firmware zu erstellen.
-
Nutzt doch einfach Luma. Dann brauch man wenigstens nicht warten ob irgendwie irgendwas zusammengestellt wird.
-
Danke!! Jetzt kann ich endlich meinen 3ds auch auf 11.13 benutzen! ♥
Ich habs gemacht aber irgendwie ging das nicht? oO Ich bin immer noch auf 11.9?
-
After some trying, I managed to create a package for the O3DS for the latest firmware. Since maybe also have other needs I upload it at this point.
Procedure is exactly the same as for the updates of 123AB, it is the full credit for it.
Unfortunately, the HBL Loader no longer works on the current firmware (no payloads available). eShop also doesn't work, but online play works fine (self-tested).
Another tip: If you want to install .cia files, it's best to boot the EmuNAND with LumaCFW, then the setups work better (for me some .cia files only went to install with Luma, not in GW mode).
So then, have fun with it.
emuNAND 11.13.0-45E
GATEWAY emuNAND 11.13.0-45E (old3DS/
2DS) Notes:
- Who already uses the GW patches of 123AB 11.3.0E /11.4.0E / 11.5.0E /11.6.0E / 11.7.0E[ simply installs the patch to the current firmware over it. (Tutorial
Step 1 - 4!) - create a new emuNAND it is not necessary!
- Consoles with emuNAND firmware under version 9.0.0-20E, jump directly to step "3c" after step 1 - 3 has been done!
Required:
- a backup of the emuNAND (for backup!)
- an emuNAND 4.5.0-10E ---> 11.2.0-35E- the download pack: old3DS / 2DS: ---> https://www37.zippyshare.com/v/6OQMVvCq/file.html Alternative: https://megaup.net/2RmhD/old3DS_GW_v11.13.0-45E.rarTutorial:
1:
Copy content to root of
SD/microSD card (console)
2: boot to GATEWAY emuNAND 3: install the sysUpdater v0.4.2.cia 3b: start and press sysUpdater, wait until it's done....
3c: Turn off the delete updates folder ---> updates (update!) rename to updates
3d: boot to GATEWAY emuNAND ---> sysUpdater start ---> press ---> wait until it's done....
4: The emuNAND is now on 11.13.0-45E. (no internet required!)bruh it's version 11.7.0-40E please give us v11.13.0-45E one thanks
-
bruh it's version 11.7.0-40E please give us v11.13.0-45E one thanks
Bruh. Use luma dude. There is no need to use an emunand.
-
i just wanted to back up pokemon x save then use it on cia
i switched to luma yesterday can t access to gw anymore
-
Bruh. Use luma dude. There is no need to use an emunand.
People should be allowed to use whatever they want without being bombarded by individuals trying to force others to stop using whatever it is they want to use. This bandwagon business is getting out of hand all over the place, please just let people do what they want with their stuff. Last I checked, you didn't pay for the systems these individuals use, which means you have zero dictation over what they do to their systems and how they do it. Just because you don't see a reason to want or need EmuNAND or Gateway period doesn't mean others don't have wants and or needs for it. People already use stuff like Luma and Boot9Strap with the Gateway setup anyways. If you have nothing constructive to say in regards to this thread, then I recommend you stop wasting your time and move along.
My intent isn't to sound rude with the comment above by all means, I just tend to bluntly put things a certain way out of habit (putting things the nice way hasn't worked out for the best for me, so I tend to put things in a more stern way if that makes sense).
-
Nach einigem herumprobieren ist es mir gelungen, ein Paket für den O3DS für die neueste Firmware zu erstellen. Da vielleicht auch andere Bedarf haben uploade ich es an dieser Stelle.
Vorgehensweise ist genau die selbe wie bei den Updates von 123AB, ihm gilt der volle Credit hierfür.
Leider funktioniert der HBL Loader nicht mehr auf der aktuellen Firmware (keine Payloads mehr verfügbar). eShop funktioniert ebenfalls nicht, aber Online-Play funktioniert einwandfrei (selbst getestet).
Ein weiterer Tipp: Wenn ihr .cia Dateien installieren wollt, bootet am besten den EmuNAND mit LumaCFW, dann klappen die Setups auch besser (bei mir gingen einige .cia Dateien nur mit Luma installieren, nicht im GW Modus).
Also dann, viel Spaß damit.
emuNAND 11.13.0-45E
GATEWAY emuNAND 11.13.0-45E (old3DS/2DS)
Hinweise:
- Wer bereits die GW Patches von 123AB 11.3.0E /11.4.0E / 11.5.0E /11.6.0E / 11.7.0E verwendet, installiert den Patch zur aktuellen Firmware einfach drüber. (Tutorial Schritt 1 - 4!)
- erstellen eines neuen emuNAND's ist da nicht erforderlich!
- Konsolen mit emuNAND Firmware unter Version 9.0.0-20E, springen direkt zum Schritt "3c" nachdem Schritt 1 - 3 durchgeführt wurde!
Benötigt wird:
- ein Backup des emuNAND (zur Sicherung!)
- ein emuNAND 4.5.0-10E ---> 11.2.0-35E
- das Download Pack:
old3DS/2DS:
---> https://www37.zippyshare.com/v/6OQMVvCq/file.html
Alternative: https://megaup.net/2RmhD/old3DS_GW_v11.13.0-45E.rarTutorial:
1: Inhalt in Root der SD/microSD-Karte (Konsole) kopieren
2: in den GATEWAY emuNAND booten
3: die sysUpdater v0.4.2.cia installieren
3b: sysUpdater starten und drücken, warten bis es fertig ist....
3c: Konsole ausschalten den updates Ordner löschen ---> updates (update!) umbenennen in updates
3d: booten in GATEWAY emuNAND ---> sysUpdater starten ---> drücken ---> warten bis es fertig ist....
4: Der emuNAND ist nun aktuell auf 11.13.0-45E. (kein Internet erforderlich!)Link doesn't work, can you reupload it?
-
closing statements
GateWay took us to the end of the 3DS lifecycle meaning it did its job, switching to Luma now is pointless. When Nintendo inevitability shuts down the online servers there will only be two things left, repeatably screwing your system nand with installations on Luma or the simplicity of loading up a rom file with GW
happy holidays to you all and remember every time a Luma user got online banned a GateWay user got their wings.
one last shout-out to 123AB for getting this all started., hope you're all doing well and now this thread can finally rest in peace
-
Many thanks! Finger crossed there will be a new 3DS version.
-
Finger crossed there will be a new 3DS version.
Very unlikely.
Jetzt mitmachen!
Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!